Trusted by 200,000+ creators & businesses in 80+ countries — Get a Free Quote Today

xTool S1: 40W vs 1064nm IR, the Real Cost, and Why Half These Searches Are for a Different Machine

Short answer, before anything else

If you searched medical grade lipo laser machine or laser machine for face and ended up here, stop. The xTool S1 is not that device and no amount of spec-sheet reading will turn it into one.

Those are low-level laser therapy devices, typically 630–680 nm, cleared through a medical device pathway. The S1 is an enclosed desktop cutter and engraver running a 455 nm diode or a 1064 nm infrared module. Same three letters in the search box. Completely different machine, completely different regulation, completely different job.

If you're actually here for the engraver, three things up front:

The 40W module is worth it only if you cut 6–10 mm plywood or acrylic on a regular basis. If 80% of your work is engraving, you're paying for cutting power you'll rarely use and carrying a heavier, hotter, hungrier head.

The 1064nm infrared laser module is the single feature that separates the S1 from a blue-diode-only machine — but it is a marking tool, not a cutting tool. More on that below, because this is where most of my early mistakes came from.

And the number nobody puts in the cart: I've tracked three laser purchases since 2019, and every one landed 25–40% above sticker by the time it was actually producing sellable work. Don't hold me to the exact percentage — it moves with what you already own — but the direction has been consistent.

Why I get to have an opinion

I handle production and purchasing for a small custom signage and gift operation. Six years, roughly 400 completed jobs, and three significant purchase mistakes that together cost me somewhere around $4,800. I keep the list taped inside a cabinet.

The first one was in 2019 — I bought on wattage alone and ended up with a machine whose bed was too small for 60% of the orders we actually got. Two months of turning work away. The second was 2022, when I skipped air assist to save $180 and burned through roughly $600 of birch plywood learning that smoke is not a cosmetic problem. The third, in Q1 2024, was buying a rotary attachment before I had a single customer who needed cylindrical work. It's still in the box. That one stings because it was pure optimism.

So when I talk about the S1, I'm talking about it from the position of someone who has paid tuition.

The 40W question is really a cutting question

Most buyers focus on the wattage number and completely miss the duty cycle and thermal load behind it. A 40W diode head runs hot, and on long production days that heat is what decides whether you finish a batch or babysit it.

Here's the honest split, from my own logs. On 3 mm basswood and 3 mm acrylic, the 40W is fast enough that it changed how I quoted jobs — one pass, clean edge, minimal sanding. On 6 mm plywood it's a two-pass job. On 10 mm it's three passes with air assist and a focus check between each, and at that point you're not cutting, you're negotiating. Acrylic cuts more predictably than plywood because plywood has glue lines and voids that don't announce themselves until the third pass.

The thing I'd tell a friend: buy the 40W because you have a cutting backlog, not because 40 sounds better than 20. I have mixed feelings about the way these machines are marketed on raw wattage. On one hand it's a genuinely useful shorthand. On the other, it quietly implies that cutting thickness scales linearly with power, and it doesn't — material density, focus, air assist, and pass count all move the number around.

The diode is 455 nm, which is why it eats dark material and struggles with clear and white. That's not an S1 problem, that's a physics problem, and no module upgrade fixes it. CO₂ systems handle clear acrylic better; that's simply what they're for, and it's not a knock on either technology.

The 1064nm module: the real differentiator, with a narrow job description

The xtool s1 1064nm infrared laser module is a 2W unit, and the 2W is the whole story. It marks metal. It does not cut metal in any thickness you'd sell.

What it does well: annealed marks on stainless and anodized aluminum, black marking on brass and some coated metals, and — this is the one that surprised me — clean marking on certain dark plastics that the blue diode either wouldn't touch or would melt into a puddle. If you make serial-numbered tags, branded metal business cards, or tool ID plates, this module is the reason to pick the S1 over a diode-only frame. Payback on our first batch of stainless tags was about five weeks.

What it doesn't do: deep engraving, thick metal cutting, or anything fast. It is slow. A 4 × 2 inch marked plate took me roughly 11 minutes at settings I was happy with. That's fine for tags. It's a disaster for volume.

There's also a safety dimension people skip. A 40W diode is a Class 4 laser source; the S1's enclosure is what brings the assembled system into Class 1 territory. That classification is contingent on the enclosure, the interlocks, and the lid being closed — per FDA's laser product performance standard at 21 CFR 1040.10. Open the lid mid-job on a 40W head and you've left the Class 1 envelope. The IR module is invisible, which makes it worse, not better. If you're running anything beyond hobby volume, budget for proper fume extraction, not an open window.

The number I actually track: total cost, not sticker

Here's the arithmetic nobody shows you at checkout, and it's the reason I stopped comparing machines by price tag years ago.

I saved $180 skipping air assist on a previous machine. That decision cost me roughly $600 in ruined 3 mm birch and about nine days of rework on a single order. Net loss somewhere near $430, plus a client who now asks for photo proofs on everything. That's the cheapest lesson I've ever bought, and it still wasn't cheap.

On the S1, the honest all-in figure ran like this. Base unit, then air assist, then honeycomb working bed, then a decent extraction fan and ducting, then the rotary attachment I should have deferred, then materials for calibration — every new material needs its own test grid before you take a customer's money. Add the waste from those grids. The machine was the smallest line item after accessories and setup. Roughly, and I want to be clear this is my shop's number and not a universal one, the working setup landed around 1.3× the machine price.

And per FTC advertising guidance, performance claims on spec sheets need substantiation — which is worth remembering when a product page lists a maximum cutting thickness. That number is usually measured on a fresh lens, ideal focus, one specific material, and generous pass count. It's not dishonest. It's also not what you'll see in week three with a dirty lens.

Between you and me, the most expensive part of a laser isn't the laser. It's the six weeks of learning settings before you trust yourself to quote a job.

Cool laser cut ideas — including the three that failed

People ask me for cool laser cut ideas constantly, and my honest answer is that the impressive ones are usually the boring ones executed well. A few that have actually sold:

Layered topographic maps in 3 mm birch, four or five stacked layers with hidden standoffs — labor-heavy, high margin, and almost impossible to photograph badly. Custom board-game inserts in 3 mm plywood, cut to the box and finger-jointed; this is where a 40W pays for itself because you're cutting a lot of small pieces fast. Slate coaster sets with deep engraving, which need almost no post-processing. And laser-cut acrylic stencils for a bakery that wanted to dust cocoa logos onto 200 pastries a day — unglamorous, deeply useful, repeat order every quarter.

The three that failed: an intricate lace-pattern acrylic screen that took 90 minutes to cut and cracked during shipping. A plywood phone stand with tolerances tight enough that humidity was enough to break the friction fit. And an 8 mm oak sign with fine engraved lettering, where the cutting worked fine but the engraving burned because oak is not a forgiving engraver's material at that depth.

Look, the pattern in all three failures is the same. I designed for how it would look in a photo, not for how it would behave as a physical object. Sanding tolerance, grain direction, and shipping shock are not design details you get to skip.

When I'd tell you to buy something else

The S1 is a poor fit if your work is mostly clear acrylic — a CO₂ system simply handles that better and pretending otherwise doesn't help you. It's a poor fit if you need to cut metal rather than mark it; neither module does that at any thickness worth quoting. It's a poor fit if you don't have a window, a garage, or the willingness to build extraction, because ventilation isn't optional on a 40W diode no matter what any listing implies.

And it's the wrong machine entirely if you came here looking for a face or body laser device. That category has its own regulatory pathway, its own clinical evidence requirements, and its own specialists to consult — not a desktop engraver forum thread.

If your work is wood, leather, coated metal, and small acrylic pieces, and you're running real jobs rather than weekend projects, the S1 with the 40W and the IR module is the configuration I'd buy again. I'd just buy the accessories in a different order next time. The rotary attachment would come last, not first.

Share:
This entry was posted in Blog. Bookmark the permalink.
Jane Smith
Jane Smith

I’m Jane Smith, a senior content writer with over 15 years of experience in the packaging and printing industry. I specialize in writing about the latest trends, technologies, and best practices in packaging design, sustainability, and printing techniques. My goal is to help businesses understand complex printing processes and design solutions that enhance both product packaging and brand visibility.

Leave a Reply